DJI Mic 2 Wireless Microphone Pod System – Interview Handle – Holder

Description

Wireless Microphone Pod (Wireless Microphones Not Included)

By clipping your wireless microphone inside this Pod you can now use it as an interview microphone, a desktop microphone, or even stick it to a metal surface using magnets. The pod has an industry-standard 1/40-20 threaded area at the bottom of it so it can be mounted to anything with a 1/4-20 mount setup. I offer 8 different accessories to use with the Pod. The configuration possibilities are endless and almost all the accessories can be used with other cameras and devices you likely already own.

The Microphone Pod itself currently supports the following wireless microphones..

• DJI Microphone 1
• DJI Microphone 2
• Neewer Cm28 Microphone
• Fulaim X5 Microphone
• Comica Vimo C

Other similarly sized microphones may fit the pod, but as of 04-01-2024 no others have been confirmed.

Also, I want to mention that with most of the mics listed above, there is plenty of room in the pod to also attach the windshields that came with those microphones and still close the Pod lid. A tiny bit of fur with stick out but you could easily put a piece of black felt in there to stop that from happening. I like using the built-in windshields inside the Pod because then you still can see all the colors of the pod vs covering it up with a foam mic cover.

The microphone pod is made with PETG, CARBON FIBER PETG, and Stainless Steel Hardware for the threaded section. It is quite well-built and has great aesthetics too.

The optional mini extendable tripod makes an excellent interview handle, has a nice-looking design on it, feels great in your hand, and has tiny little magnets at the bottom section it that keep the tripod legs closed when used as a handle. It’s also a great little tripod to use with any camera with a 1/4-20 thread hole for mounting. It can support about 5 lbs so it can even hold your DSLR. Honestly, it’s one of the coolest little tripods out there. I had it made especially for this project.

If you just want a regular handle we offer that as well. Our regular handle has a slick design and very is light. It also has a 1/4-20 threaded hole at the bottom.

Please Note: The Square Microphone Flag Add-On does not fit when using the tripod extension arm in a desktop scenario. I could however easily make a piece to screw in between the extension arm and microphone Pod that would allow its use. If you want that ask. I can make it happen. It will likely be a 10.00 to 15.00 piece due to its size and necessary hardware.